O-rings

Main compounds for O-Rings

EPDM

Elastotech Code

Minimum temperature

Maximum temperature

ME0940

-40°C

150°C

Our compound is homologated according to:

EN 16421:2015 – KTW BWGL for cold and hot drinking water up to 85°C;
MOCA EC 1935:2004;
GMP APPROVED PRODUCTION PROCESS;
FDA compliant (177.2600-21) for food;
EN681-1 WA/WB;
WRAS (BS6920) for cold and hot drinking water up to 85ºC;
NSF ANSI 61 for cold and hot drinking water up to 85ºC;
KIWA BRL-K1750
TGM ÖNORM B5014-1
ACS CLP

Compound with exceptional mechanical characteristics and compression set. Approved according to the main world standards for use in contact with food and drinking water.

Resistance to: ozone, atmospheric agents, UV rays, water, aging, food, vegetable and animal oils, salt solutions, temperatures, acids.

SILICONE

Elastotech Code

Minimum temperature

Maximum temperature

ME2020

-60°C

250°C

Our compound is homologated according to:

EN 16421:2015 – KTW BWGL for cold and hot drinking water up to 85°C;
MOCA EC 1935:2004;
GMP APPROVED PRODUCTION PROCESS;
FDA compliant (177.2600-21) for food;
WRAS (BS6920) for cold and hot drinking water up to 85°C;
NSF ANSI 61 for cold and hot drinking water up to 85°C;
ACS CLP

Compound formulated according to the main world standards for use in contact with food and drinking water.

Resistant to: ozone, atmospheric agents, aging, excellent dielectric, non-toxic, water, vegetable and animal oils, salt solutions, temperatures, acids, UV rays.